|
We would like to wish everyone a happy New Year. RepRapWorld has had a very succesful 2017 and we would like to thank you! our clients to help make this happen. We always appreciate feedback and with the community we are able to develop 3D Printing solutions for everyone.
For 2018 we hope to expand our inventory with more new items which can help keep RepRap allive!
|
|
|
Beer & Pizza party! Tomorrow Thursday 04-01-2018
|
|
|
Meet the maker
By Aad Koene
Hi, i'm Aad Koene, i'm a maker .....
8 years ago my life was affected by COPD and changed it from one day to the next.
Before that i had a garage and repaired and rebuild Land Rover's, but that's history.
After a revalidation time of a few years it was time for a big change in my life!
|
|
At last i found it in 3D printing.
Two years back i bought my first printer, a Heacent Prusa i3.
One of the many Chineese Clones of the open source printer Jozef Pruza developed.
After a few false startups and stumbles i rolled into the World of 3D, a total new concept for me.
A world of learning, visions by ev'ryone, assumings and still a biljon dollar business and growing.At first i started with the production of foodsafe cookkiecutters and that kind of foodsafe stuff, but cheap is still the keyword in that part of business, above foodsafe and health.
So i left that dead-end an got on with printing as my hobby and got the hang of it by making my machine as good as a proffesional one like Ultimaker and so on.
Along with printing as my hobby there came some commercial printing, and some more.
|
|
|
Last year i bought a second Prusa i3, an Anet A6, due to a shortage in production capacity.
So I became working as a semi professional and produce all kinds of 3D-stuff from game-accessories to rapid manufactoring in all kinds of material and colors.
In the same time i rebuild my first Prusa i3 from a 20 to 20 printbed to a larger 24 to 35 printbed, for some large stuff and more room for duplicating items.
.
|
|
|
As the title says: "I'm a Maker", it is true; i'm a maker, not a designer.
But when the time comes i'm evolving more and more designings, small but usefull stuff.
At first for re-designing stuff for better use untill now; drawing stuff for production as spareparts, scenery, trains and wagons for modeltrains in H0 and G and some other stuff.
As you see i'm growing and learning from maker, through remaker to designmaker ....
Never to old for learning new stuff!!!
I wish ev'rybody a lot of Happy Printing and a Healthy New Year.
|
|
|
Nema23 New in stock!
New in stock at RepRapWorld are the Nema23 steppers and suitable drivers.
If you are building a ginormous delta or thinking about making a 3D printer which might have a interchangeable milling head. You might have a look at the new Nema23 motors and compatible external stepper drivers.
|
|
|
This is our strongest Nema23 motor with 30cm wires without connector. General specifications are a flat shaft, 30.59 Kg.cm, 4.0A and 1.8 degree stepping.
Normal price €40.00
|
|
|
This is our standard Nema23 motor with 30cm wires without connector. General specifications are a flat shaft, 12.85 Kg.cm, 4.0A and 1.8 degree stepping.
Normal price €30.00
|
|
|
Powerful external stepperdriver based on the SL2690A chip. Step resolution is up to 1/128, maximum current is 6.5 A and voltage input is 20V - 90V. Logic voltage is 3.3 or 5 V
Normal price €18.99
|
|
Simple but powerful external stepperdriver based on the TB6600 chip. Step resolution is up to 1/32, maximum current is 3.5 A and voltage input is 9V - 42V. Logic voltage is 5V.
Normal price €18.99
|
|
|
RepRapWorld's Meet the maker wanted!
|
|
If you would like to participate in the Meet the maker section. Please use the button below to contact us. And share your story with thousands of like-minded-makers!
We will supply a free spool or RepRapFilament for any story suitable for the newsletter!
|
|
Real Filament update
Petg Translucent and Opaque
|
|
PetG is not known by many. Pet is the same stuff your average soda bottle is made of, the G is the variant type. The base material has see-through properties. So when properly extruded the end-object will retain a certain amount of transparency.
What makes PetG so great? When comparing the material has a lot of the flexible properties of ABS. Allowing a lot of abuse and high impact resistance. But ABS is usually difficult to print with as it can shrink 5~8% during cooling which tears up your model. PetG has a similar shrinkage as PLA, so it is much easier to print with!
Print Real Filament PetG at 240 degrees and a bed temperature of 60 degrees with some 3DLAC and you can print even the biggest items.
|
|
|
|
PET-G (Polyethyleentereftalaatglycol) is a very strong, water resistant thermoplastic, with beautiful shiny result. Available is many colors, opaque or transparent and 1.75mm or 2.85mm.
PET-G Yellow 1.75mm 1Kg.
€24.49
|
|
PET-G (Polyethyleentereftalaatglycol) is a very strong, water resistant thermoplastic, with beautiful shiny result. Available is many colors, opaque or transparent and 1.75mm or 2.85mm.
PET-G Translucent Magenta 1.75mm 1Kg.
€24.49
|
|
So is 1KG not enough? PETG is available on 3KG spools in colors White, Black, Red and Blue.
So your bigger projects don't have to suffer. If you are in need of any bigger spools please contact us as we might be able to order even larger spools in custom sizes.
|
|
|
|
On Thingiverse you can find a lot of cool stuff to print. From Spinners to Pokemon. You can also find handy stuff to cover up electronics.
Maker Phil_Maddox
As we just started selling the Duet3D products, it might be wise to print a box to be able to house your Duet Wifi board.
Find the Duet Wifi box here.
|
|
|
Update; RepRapWorld will be attending Paperworld in January 2018. At this show we will be mostly promoting the consumables. We are the official distributor of Real Filament and we will be showing the filament and other consumables. Of course we will be printing T-Shirts and showing off the big delta printer. So if you want a free T-shirt, join us at Paperworld.
|
|
Hall 6.0 A64
We will be sharing the booth with one of our Chinese partners. We find it a great opportunity to promote Real Filament and the RepRapWorld in the office supplies world. The next step in making 3D Printing mainstream.
|
|
|
|
|
|
|
Nema23
12.85 kg.cm
€30.00
|
|
|
|
SL2690A
External stepper
€50.00
|
|
|
|
|
Nema23
30.59 kg.cm
€40.00
|
|
|
|
|
|
|
|
